top of page
SDI-K1 All Steel 1/4" Drop-In Anchor Kit - 65 Pk Kit
SDI-K1 1/4-20 All Steel Drop-In Kit w/ Setting Tool & 3/8" Carbide Tip Masonry Bit
  • Anchor Qty./Size: 65 - 1/4-20 All Steel Drop-In Anchors
  • Masonry Bit: 3/8" x 4" Carbide Tip Masonry Bit
  • Setting Tool: 1/4" All Steel
  • Features California Use Info
  • ⚠️ Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

SDI-K1 All Steel 1/4" Drop-In Anchor Kit - 65 Pk Kit

$49.99 Regular Price
$48.99Sale Price
Excluding Sales Tax |
    1. May be used only in Solid Wall applications
    2. Drill a hole 3/8" x 1-1/4" deep with the properly supplied 3/8" Carbide Tip Masonry drill bit.
    3. Make sure the hole is 1/8" deeper than the fastener embedment.
    4. Clear the hole of excess debris - to assure optimal fastening results.
    5. Tap the anchor with hammer into the drilled hole, until it is flush with surface.
    6. Using the designated drop-in setting tool, drive expander plug until the sholder of the setting tool makes contact with the top sholder (surface) of the steel drop-in anchor.
    7. Minimum thread engagement should be equal to the nominal diameter of the threaded insert.
    8. Caution: Oversized holes will make it difficult to properly set the anchor and will reduce the anchor's load capacity.
bottom of page